1. Introduction
Molten metal flows into the center of rotating disk from melting device through guiding device, then scatters along radial distribution and forms a thin liquid film one the rotating disk under the effects of inertia and centrifugal casting. When liquid film reaches the edge of rotating disk, it will be atomized into liquid drops, then these drops are solidified into powders.
It’s not necessary to use protective atmosphere in the melting process. High quality powders with uniform particle, good fluidity, proper arrangement and without hollow is achieved by adjusting atomizing temperature, rotation speed of rotating disk, nozzle geometrical morphology, spraying angle, etc.
This equipment is suitable to produce various low melting metal and alloy powders, such as solder, Al powder, Mg powder, etc. It also produces spherical or cone-shaped powders.
2. Features
(1)It’s suitable to produce low melting metal and alloy powders for battery material, accelerant, metal injection moulding and 3D printing.
(2)Good fluidity and arrangement.
(3)Less production cost and procedure; high quality powder with uniform particle.
(4)Easy operation and maintenance;
(5)Rotation speed of the rotating disc is 10000~40000rpm. Daily output is up to 2t.
(6)Now the equipment we developed is suitable for producing high melting and ultrafine metal powders. Melting temperature is up to 1750℃. High-speed electric machine is 60000~120000rpm.
3. Technical Parameters
(1)Melting furnace: 100kg~350kg/furnace
(2)Melting temperature: depending on metals.
(3)Powder particle: D50=50-500μm(general); D50=5-350μm(high-speed).
(4)Powder particle: D50=50-500μm(general); D50=5-350μm(high-speed).
(5)Capacity: 2000kg/24h. Easy operation and maintenance.
4. Our Company Information
Easyfashion Industry is a comprehensive product supplier with many joint ventures and cooperative enterprises, specializing in designing, manufacturing, and selling various kinds of industrial furnaces, such as heat treatment machines, material heat treatment machines and so on. Our company has many advanced powder and metallurgy products manufacturing and melting technology, specially with abundant technical foundations and production experiences of smelting and advanced material production equipments.
3. All Atomization Equipment by Our Company
We can provide high pressure water atomization equipment, gas atomization equipment, vacuum gas atomization equipment, plasma atomization and centrifugal atomization of each batch of 3~1000KG Class. They can be used to produce iron-based powder, nickel-based powder, copper-based powder, silver-based powder, Ti, Mg, Al, Mo, W, SS and many other particle sized alloy powders. We can also customize equipment according to client’s special requirements.
FAQ
1. How can I know your factory can produce equipment I need?
Re: Contact us and let us know your requirements of equipment. Then we will send these requirements to our technical department. So we will know whether our factory can offer you equipment or not.
2. Does your company customize equipment for customer?
Re: yes, we can customize equipment according to customers' requirements.
3. How to contact us?
Re: contact information as follows:
